Showing posts with label rain gauge. Show all posts
Showing posts with label rain gauge. Show all posts

Thursday, May 25, 2023

A New Rain Gauge Option for CoCoRaHS

A new approved rain gauge, the Tropo rain gauge from Climalytic Instruments, is now available to CoCoRaHS observers. This is a "premium" alternative to the Stratus gauge manufactured by Productive Alternatives. These are the only two gauges approved for CoCoRaHS (along with the NWS 8" standard rain gauge). I've been seeing a lot of comments about the new Tropo gauge, it's cost, and other things the past two weeks. We realize that many observers cannot or do not want to spend the money for the features it offers. The Tropo gauge incorporates many suggestions made by CoCoRaHS observers over the years for improving the overall gauge. One key difference - it IS more accurate than the Stratus gauge, and it was designed that way. We know the Stratus gauge over-measures rainfall by about 2.5%, and the Tropo gauge does not have that error.

Other features of the gauge that differentiate it from the Stratus gauge:

  • The Tropo holds about 13" of water vs. 11" for the Stratus. This is something that will be useful heavy rain-prone areas, like those that frequently affected by tropical systems. And although we prefer daily observations, the higher capacity also allows for heavier multi-day accumulations
  • The funnel has pre-drilled holes in the rim for mounting the supplied bird deterrent spikes.
  • The funnel and inner measuring tube were designed to make capturing the inner tube with the funnel extremely easy.
  • The inner measuring tube has a wide base for stability in the outer tube and on your counter if pouring water into it.
  • The funnel cap is deeper to minimize splash-out, and locks on to the outer tube to minimize blow-offs.
  • The gauges comes with hardware and a much better designed mounting bracket that easily secures to a post or to a pole.
  • The gauge comes with a handle that slides into the mounting bracket to aid in pouring into the inner measuring tube for measurement. A small pouring spout is molded into the outer cylinder as well to prevent spilling while causing negligible impact to snow core sampling.

There are a number of other improvements as well, and you can read about those on the Climalytic Instruments web site.


Do I Have to Use the Tropo Gauge?

NO. If you are currently using the Stratus gauge there is no need to change unless you want to. We realize that many observers cannot or do not want to spend the money for the features it offers.

Think of it this way. Many weather enthusiasts have home weather stations. An inexpensive weather station can be purchased at your local big box home store, and that will satisfy the needs of many enthusiasts. On the other hand, other enthusiasts want something more and will spend the money for a better system with more features and benefits.


How Accurate is the Tropo Gauge?

The Stratus gauge has a known error of about 2.5 percent (reads 2.5 percent too high). That is within the stated NWS error range of 4 percent from the 8-inch standard rain gauge. The Tropo gauge is accurate to less than 1 percent error. This accuracy is determined by measurement.

The volume of water of a “disc” one inch high and 4 inches in diameter (the outer cylinder) is 205.926 ml (cm3), and it's mass is 205.926 grams. We know there is an error in the Stratus gauge because the volume of water filled to the one inch mark on the inner measuring tube weighs 200.8 grams, not 205.9 grams. A 10-year comparison study of the 4-inch gauge and the NWS 8-inch rain gauge by the Colorado Climate Center found that the 4-inch gauge was higher than the 8-inch gauge by about 3 percent each year. That is consistent with the known accuracy of the Stratus 4-inch gauge.


I Have Both Gauges and the Measurements Rarely Agree.

Even when identical Stratus or Tropo gauges are mounted side by side there will many times be differences in amounts. If all things were equal in an event, the Tropo gauge would be ~0.01" lower at 0.25" in the Stratus, 0.01 to 0.02" lower at 0.50", and 0.03" lower than the Stratus at one inch. So, a measurement difference of a few hundredths between gauges likely has little to do with calibration - it's just a difference caused by any number of things - wind speed and direction, air turbulence around the gauges, rain intensity, etc.

Although the primary field testing has been completed, we are currently continuing field comparisons to not only Stratus PA Gauge, but to the 8" standard rain gauge as well.


Doesn't Using Different Gauges Affect the Interpretation of Precipitation Measurements?

Both rain gauges fall within the +/-4 percent range of the NWS 8" Standard Rain Gauge. Accurate precipitation measurements are the goal, but the reality is that over over the long term there are many other factors that affect gauge catch and precipitation measurements such as wind, rain intensity, siting and exposure, observer error, etc., that are beyond our control.

As a final thought, consider this old adage (Segal's law), reinterpreted for precipitation measurements:

"A person with a rain gauge knows how much rain fell. A person with two rain gauges is never sure."



Monday, June 6, 2022

Revisiting Bird Deterrents, and Clean Rain Gauges

After my blog post on April 5 about keeping birds from using your gauge as a porta-potty a number of observers posted ideas on our Facebook group about their solutions.There is no lack of creativity out there. The most important thing to remember about any solution you come up with is that it does not direct any additional water into the gauge, i.e. nothing can drip or run into the funnel from wires, toothpicks, or whatever.

Dave, our CoCoRaHS observer at PA-BK-48 in Newtown, PA found a commercial solution. Ambient, a company electronic rain gauges and weather stations has a bird deterrent for one of their gauges that will work with the 4-inch CoCoRaHS gauge. 

 

Ambient bird spikes on 4-inch gauge funnel

The model number for this is WS-2902-BIRDSPIKE and it retails for $15.99. Dave indicated that "ll that was required was for me to trim a few of the black rubber spike holders so it would fit. Scissors worked nicely. All told it was up in 10 minutes from box opening to 'in the field.' It is held with a stainless steel zip-tie like device that can be tightened more later if it loosens over time." Thanks to Dave for letting us know about this solution.

While we are on the subject of birds and the mess they can make in your rain gauge let's talk a little rain gauge maintenance. During the warm season a lot of gunk (algae, dust, etc.) can accumulate in the gauge. There are numerous ways to clean the inner measuring tube. Rolled up newspaper works, as do standard bottle brushes along with a few drops of detergent or bleach. I found a brush that is perfect for he inner measuring tube - sort of like carpet on a stick. It's soft and won't scratch, maintains contact with the entire surface of the tube, and is long enough to reach and clean the bottom of the tube. The brush is 16 inches long and one inch in diameter - perfect for the inner measuring tube. I found mine on Amazon, but a recent check shows it is currently unavailable. It retails under $7 on Amazon. You may be able to find it elsewhere.

 


 

Thanks to all those on the Facebook group with ideas and suggestions.


Tuesday, April 5, 2022

Keeping Birds Off of Your Rain Gauge

Spring...when flowers bloom, gardens get planted, and birds sometimes decide to use the 4-inch rain gauge for a perch and/or a porta-potty. Although a properly perched bird or two can be a great photographic opportunity, more often than not they leave a mess. What can you do to discourage our feathered friends from perching on the gauge while at the same time not affecting the catch of the rain gauge?  A few years ago Nolan Doesken, CoCoRaHS founder, put out an appeal for suggestions on how to deal with this problem. He received quite a range of ideas. Here are a few of them.

  • Use tape to attach tooth picks or thin, rigid wires to the rim of the gauge about every1 ½ to 2 inches and sticking up about 2" above the rim.
  • Mount a ring of stakes with flags or streamers or shiny stuff around your gauge making sure they stick up a bit higher than the gauge. You can now even purchase holographic ribbon tape that is claimed to scare away birds.
  • Real cats
  • Stuffed cats
  • Rubber snakes
  • Real snakes
  • Plastic owls
  • Electronic owls
  • WD-40 or similar smelly solvent/lubricant applied to the outside of the funnel. A problem with this is that it will likely have to reapplied often, and it could be messy.

I tried one trick suggested by an observer in our CoCoRaHS Facebook group last year. They suggested putting something in the vicinity of the gauge higher than the top of the funnel. Birds often perch on the funnel because it's the highest vantage point in the area. If you give them something that is higher than the gauge, they will tend to use that instead. This could be a shepherd's hook plant hanger or something similar. I attached pieces of scrap wood to my post in an "L" configuration. This seemed to work well as I only had one to two instances of "improper use of the funnel". 


 

If you search "birds" in our Facebook group you will find photos of some rather ingenious wire configurations to deter birds. Here is one of my favorites (which no doubt took a lot of work) by Richard Martin. If I were a bird I'd think twice about getting close to this one!

 No photo description available.

Two things to keep in mind if you are creating your own deterrent. Nothing should be in the funnel, and any wires, etc. should be bent slightly away from the funnel so that water doesn't collect on them and drip into the gauge.

The toothpick/wire idea is probably the easiest. Here are some instructions on making the toothpick deterrent.

  1. Cut about a 14 inch long piece of ¾ duct tape. Lay it adhesive side up on a flat surface, and fasten down each end with a small piece of tape.
  2. Arrange toothpick on the tape about one to one and a half inches apart. Round toothpicks are best – the have a little more heft to them. Press the toothpicks on to the tape so they adhere.
  3. When you have arranged all the toothpicks, cut the strip free on both ends, inside of where you taped it down.
  4. Wrap the tape with the toothpicks around the edge of the funnel, keeping the top edge of the tape at or just below the edge of the funnel. Overlap the ends, and then press firmly all around the funnel.

For the photos below I used masking tape, but that will not hold up very long in wet weather. Duct tape or some other moisture resistant tape is best. Since you won’t find duct tape in a ¾” width, you will need to rip a strip approximately that wide from a wider strip. This is easy to do – first snip the end of the wide piece of tape with a scissors, and then rip the narrower piece off.


Good luck with the birds this season.